1. Access the router's configuration page.

Log into your router’s configuration page by entering 192.168.0.1 into a browser. There is not password by default.

2. Select your connection setup option.

Click on “Manual Internet Connection Setup” to configure your router’s connection settings manually.

You will arrive at the manual configuration page for the routers WAN.

3. Select your connection type.

In the “INTERNET CONNECTION TYPE” section you are given a several options for connection type and we are using “Dynamic IP (DHCP) “ in this example. Please confirm with your ISP about your connection type.

4. Enter the first DNS resolver.

Enter 208.67.222.222 in the “Primary DNS Address” field.

5. Enter the second DNS resolver.

Enter 208.67.220.220 in the “Secondary DNS Address” field.

6. Save your settings.

Click “Save Settings” in the WAN section.

NEXT: Test your new settings →

Articles in this section

Configuration for D-Link DIR-657

1. Access the router's configuration page.

2. Select your connection setup option.

3. Select your connection type.

4. Enter the first DNS resolver.

5. Enter the second DNS resolver.

6. Save your settings.

NEXT: Test your new settings →

Comments

Articles in this section

1. Access the router's configuration page.

2. Select your connection setup option.

3. Select your connection type.

4. Enter the first DNS resolver.

5. Enter the second DNS resolver.

6. Save your settings.

NEXT: Test your new settings →

Related articles