Disclaimer:
Due to the wide variety of devices available and potential variations in their firmware, the information presented below may or may not be accurate. For this same reason, OpenDNS support will generally not be able to provide device-specific assistance beyond what is provided below. If you need further assistance specific to your device, please contact either the manufacturer's support team, or your ISP if you are using leased equipment.
Note: This guide is for the OpenDNS configuration of NETGEAR routers. If you are already using the Parental Controls integration that is available with certain NETGEAR routers following the directions in this guide will toggle the Parental Controls from ENABLED to DISABLED.
If you are looking to use NETGEAR Live Parental Controls, please go through the automatic registration process in the Parental Controls tab on the NETGEAR genie app at http://netgear.com/home/discover/apps/genie.aspx rather than following the directions in this article.
1. Log into the router configuration page at http://routerlogin.net
2. Click on the Internet Link along the left hand side
3. Find the setting for Domain Name Server (DNS) Addresses
Enter the following three DNS IPs (first two if there are only two spaces). All DNS spaces must be filled: 208.67.220.220, 208.67.222.222, and 208.67.222.220. After this has been done click the Apply button.
4. Clear your caches and test functionality
For directions see Clearing the DNS Cache on Computers, and Web Browsers
NEXT: Test your new settings →