Articles in this section

See more

ZTE ZXV10 W300

Avatar
Anthony Honciano
Updated
Follow

Configuring ZTE ZXV10 W300

  

 

Disclaimer:

Due to the wide variety of devices available and potential variations in their firmware, the information presented below may or may not be accurate. For this same reason, OpenDNS support will generally not be able to provide device-specific assistance beyond what is provided below. If you need further assistance specific to your device, please contact either the manufacturer's support team, or your ISP if you are using leased equipment.

 

 

 

 

NOTE:

This is written based on the PDF manual from https://www.ote.gr/documents/10280/645157/ZTEZXV10W300%28B%29v52UserManual_EN.pdf/abfcd607-cb60-4ca0-9288-95e215d98b6e.

1. Log in to your router using the IP address in your browser http://192.168.1.1 and login with the admin username and password admin/admin (page 13)
2. Click on Interface Setup tab and LAN sub-tab. (page 24)
3. Locate the DNS section, change the DNS Relay to "Use User Discovered DNS Server Only"
4. Set the Primary and Secondary DNS servers to 
  • 208.67.222.222
  • 208.67.220.220

5. Save your settings and the router should reboot.

abfcd607-cb60-4ca0-9288-95e215d98b6e.png

 

 

 

Test your settings.

 

To ensure that OpenDNS is working properly for you, please flush your browser and DNS cache by using the steps at http://www.opendns.com/support/article/67. Next, visit http://welcome.opendns.com to get the Welcome message when successfully set up.

 

I need help

 

Having problems with the set up? Please visit our blog post for troubleshooting the top issues some users experience: http://blog.opendns.com/2014/12/12/five-questions-top-support-requests-answered/

If you're still experiencing difficulties, flush your caches using the "Test your settings" section. Then download and run our diagnostic tool, and click Run Test. After the test completes, copy and paste the URL into this ticket. If you are experiencing difficulties copying the URL from the diagnostic tool, please use the steps at http://www.take-a-screenshot.org to take a screenshot of the diagnostic tool after it finishes.

The URL should start with http://opendnsupdate.appspot.com/d/######.

MAC: http://www.opendns.com/download/mac/diagnostic
WINDOWS: http://www.opendns.com/download/windows/diagnostic

Next, send us a support ticket at http://support.opendns.com and we'll be in touch with you soon.

Related articles