TP-LINK TD-W8968 Router Configuration
Disclaimer:
Due to the wide variety of devices available and potential variations in their firmware, the information presented below may or may not be accurate. For this same reason, OpenDNS support will generally not be able to provide device-specific assistance beyond what is provided below. If you need further assistance specific to your device, please contact either the manufacturer's support team, or your ISP if you are using leased equipment.
(This setup article is based on the TP-Link user manual: http://www.tp-link.com/resources/document/TD-W8968_V3_User_Guide_1910010970.pdf)
Step 1. To access the configuration utility, open a web-browser and type the default address 192.168.1.1 in the address field of the browser.
Step 2. Click on "Advanced Setup" --> "DNS" --> "DNS Server
Step 3. Select "Use the following Static DNS IP Address". Enter 208.67.222.222 as the primary DNS server, and 208.67.220.220 as the secondary DNS server
Step 4. Click "Save / Apply" to save the new configuration.
Step 5. Flush your browser and DNS cache by using the steps at: http://www.opendns.com/support/article/67 to ensure the new DNS settings apply.
Test Your Settings
Go to http://welcome.opendns.com and you will be greeted with a welcome message. If you receive the oops message, please visit our blog at http://blog.opendns.com/2014/12/12/five-questions-top-support-reque... for quick tips on how to troubleshoot some of the issues you maybe experiencing. If you are still not able to resolve the matter, please send us a support ticket at http://support.opendns.com.