ZTE ZXV10 H201L

This is a tutorial for configuring ZTE ZXV10 H201L and I'd like if someone could put it here https://support.opendns.com/hc/en-us/articles/228006687-ZTE-Router-Configuration

Configuring ZTE ZXV10 H201L

1. Log in to your router using the IP address in your browser http://192.168.1.1 and login with the admin username and password. The default ones should be user/user

2. Click on Network tab and LAN sub-tab and then on the IPv4 DHCP Conditional Serving Pool sub-tab.

3. Locate the table below. You will need to modify each port by clicking on the pencil icon in the modify column.

4. Clicking on the pencil icon will fill the boxes above the table. Change the DNS Server1 IP Address to 208.67.222.222 and DNS Server1 IP Address to 208.67.220.220.

*It is not required to fill in DNS Server3 IP address.

5. Do the 4th step for every row of the table.

Test your settings.

To ensure that OpenDNS is working properly for you, please flush your browser and DNS cache by using the steps at http://www.opendns.com/support/article/67. Next, visit http://welcome.opendns.com to get the Welcome message when successfully set up.

I need help

Having problems with the set up? Please visit our blog post for troubleshooting the top issues some users experience: http://blog.opendns.com/2014/12/12/five-questions-top-support-requests-answered/

If you're still experiencing difficulties, flush your caches using the "Test your settings" section. Then download and run our diagnostic tool, and click Run Test. After the test completes, copy and paste the URL into this ticket. If you are experiencing difficulties copying the URL from the diagnostic tool, please use the steps at http://www.take-a-screenshot.org to take a screenshot of the diagnostic tool after it finishes.

The URL should start with http://opendnsupdate.appspot.com/d/######.

MAC: http://www.opendns.com/download/mac/diagnostic
WINDOWS: http://www.opendns.com/download/windows/diagnostic

Next, send us a support ticket at http://support.opendns.com and we'll be in touch with you soon

rotblitz January 18, 2017 11:51

Your router model is totally different from the instructions you linked to. These cannot be compared.

Did you really expect to find support here for strange router behavior like grayed out buttons? Better refer to your router's support site. It's unlikely that another person here has the same router and a solution at hand.
http://support.zte.com.cn/support/index.aspx

One thing, if you ever become able to apply the OpenDNS resolver addresses, you must fill out also "DNS Server 3", of course. You can use 208.67.222.220 or 208.67.220.222 for this.

If you do not succeed, you may consider to flash your router with alternative firmware.
https://wiki.openwrt.org/toh/zte/zxv10h201l

larper January 18, 2017 13:08

I figured out how to setup openDNS on this router and would like if someone can put this tutorial on the configuration page for ZTE routers https://support.opendns.com/hc/en-us/articles/228006687-ZTE-Router-Configuration

rotblitz January 18, 2017 19:01

You forgot to mention filling out the 3rd DNS server address too.

Best is to raise a ticket with OpenDNS.

larper January 19, 2017 17:06

rotblitz January 19, 2017 19:53

...but recommended. Are you sure that the third entry isn't possibly used by an ISP DNS address if left empty?

larper January 19, 2017 19:57

I don't know. OpenDNS is working so far.

ZTE ZXV10 H201L

Configuring ZTE ZXV10 H201L

Test your settings.

I need help

Comments

Didn't find what you were looking for?